Tower Pro MG995 Analog Servo x2
Application: Robot and RC cars, 50-90 Class Nitro planes and 26-50cc Gasoline planes and others
Stall Torque: 11kg/cm at 6.0V
No Load Running Speed: 0.17sec/60° at 4.8V, 0.13sec/60°at 6.0V
Size (L*W*H): 40.6mm*19.8mm*37.8mm
Weight: 55.2g
Bearing Qty.: 2
Gear/ Case Type: metal/ plastic
Output shaft gear qty:25T FUTABA
Interface Type: compatible with JR & Futaba interface
Storage Temperature: -20℃-60℃
Dead band width: ≤4us
Operating Voltage: 4.8-6V
Servo Cable Length: 300mm
Application Fields: Robot and Remote Control Cars, 50-90 Class Nitro Airplanes and 26-50cc Gasoline Airplanes and others
Included Parts:
Standard Servo Arms: two
Installation Screws: one bag
Digital Servo: 1pc
Avoid getting a fake Tower pro servo. Check out the following
1. Tower pro servo adopts imported plug and gold-plated terminal. In general fake servos use domestic plug, no gold-plated plug is easy to oxidize and loose.
2. Tower pro servo adopts 60 cells signal wire, domestic 30 cells and 45 cells signal wires are usually fake servo.
3. The case of Tower pro servos usually have two kinds of mold; new servos use engineering plastic shell with copper cover. The whole case has three copper covers, more durable than old types.
4. Tower pro 995 series servos all have metal gears. The gears are made of steel and copper, the big gear is copper and the small gear is made of steel.
5. The old types use white lube oil, while the new servos use black lube oil with anti-wear additives.