Dualsky TC.3A.200H Tuning Combo x2

Dualsky TC.3A.200H High RPM Tuning Combo x2

2x Dualsky XM2223EA-10 Motor + 2x Dualsky XC1010BA ESC. Get some spares on the side, or offer it to a friend.

Description:
TC.3A.200H, high RPM combo kit is suitable for In door model Max 270g sport model.

XM2223EA-10 Motor Features:
● Improved front cover, better heat dissipation.
● Rotor with more beautiful star design.
● Increased the rigidity of the rotor and shell, reduce vibration, 
   can withstand more loads.
● Adopt tile magnets with higher grade. 
● Higher efficiency laminations. 
● Reduce the air gap of the stator and rotor, increase efficiency. 
● Thicker high temperature enameled wire, improved insulation 
   and impact resistance. 
● Compare EA with CA at same level, the power increased 10-20%, 
   and efficiency increased 3-5%.
● More options for KV value, suitable for practical use.
● Add XM2838EA, XM4255EA which models CA do not have.
● Motor mounting holes and shaft diameter compatible with CA Series.
● Accessories compatible with the CA series (except for new models)
● 8mm propeller mount with the thinner threads, propeller not easy 
   to loose.

Dualsky XM2223EA-10 MotorSpecification： 
KV: 2850RPM/V
Alias(Stator diameter, Magnet length): 1706
Weight: 21.0g
Diameter: 21.8mm
Length: 23mm
Diameter of Shaft: 3.0mm
Mounting holes pitch: 14/14mm
Slots,Poles: 12,14 
Idle Current(Io) @10V: 0.8A
Resistance(Ri): 100mOhm
Cruising power[8 mins]: 53.65W
Bursts current[15s]: 8.8A
Peak power[15s]: 97.5W
Recommended ESC: XC1010BA
Setup 1(No. of Cell, Prop.): 2S, 6x4 
Setup 2(No. of Cell, Prop.): 3S, 4x3 
Max. weight of sport models: 0.27kg
Max. weight of 3D models: 0.18kg
Memo: Indoor models

Dualsky XC1010BA ESC Specification： 
Dimensions: 28x 18x 6mm(L x W x D)
Weight: 7.5g
Number of Cell: NiXX 5-10, 6-12V
LiPo 2-3, 7.4-11.1V
Resistance(Ri)(Ohm): 0.0186
Max Cont. Current & Max Cont.Output: 10A, 105W
Max Burst Current & Max Burst Output: 15A, 153W
BEC / Dissipative Power: 5V/1A (1.2W, Linear)
Programmable: Throttle + ProgCARD V2
Input Wires: 100mm, 20AWG, JST
Output Wires: 65mm, 20AWG, DB2
Signal Wire: 120MM JR