Futaba S3001 Standard Analog Servo x2
The price is for 2 futaba S3001servos
No Loading Speed: 0.28sec/60 degrees at 4.8V ; 0.22sec/60 degrees at 6.0V
Stall Torque: 2.4kg.cm at 4.8V ; 3kg/cm at 6.0V
Dimensions: 40.5×20×36.1mm
Weight: 45.1g
Interface Type: JR
Bearing Type: Ball Bearing
Gear Type: All Nylon Gears
Connector Wire Length: 305mm
Current Drain (4.8V): 7.2mA/idle
Current Drain (6.0V): 8mA/idle
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Angle: 45 Deg. one side pulse traveling 400usec
This is a Standard Servo with a Ball Bearing on the output shaft. This has a "J" connector and uses a nylon gears.
This servo can produce high-current draw from your batteries. If using Ni-MH or LiPo batteries, make sure they are capable of delivering sufficient amps.
Single top ball bearing same mounting as S148 and S9201 (individual rectangular grommets) 3-pole motor Nylon gears