Futaba S3001 Servo x2

Futaba S3001 Standard Analog Servo x2

The price is for 2 futaba S3001servos

No Loading Speed:   0.28sec/60 degrees at 4.8V ;  0.22sec/60 degrees  at 6.0V

Stall Torque:   2.4kg.cm at 4.8V ;  3kg/cm at 6.0V

Dimensions:   40.5×20×36.1mm

Weight:   45.1g

Interface Type:  JR

Bearing Type:   Ball Bearing

Gear Type:   All Nylon Gears

Connector Wire Length:  305mm

Current Drain (4.8V):   7.2mA/idle

Current Drain (6.0V):   8mA/idle

Operating Voltage:   4.8-6.0 Volts

Operating Temperature Range:   -20 to +60 Degree C

Operating Angle:   45 Deg. one side pulse traveling 400usec

This is a Standard Servo with a Ball Bearing on the output shaft. This has a "J" connector and uses a nylon gears.

This servo can produce high-current draw from your batteries. If using Ni-MH or LiPo batteries, make sure they are capable of delivering sufficient amps.

 Single top ball bearing same mounting as S148 and S9201 (individual rectangular grommets) 3-pole motor Nylon gears