Hobbywing FlyFun 18A ESC x2
You will receive 2x ESC and optional of 1 prog card.
Please note that hobbywing ESCs have undergone different name change. It used to be Pentium, then Fentium and for now it is Flyfun, however the performance has not changed. Since the design is constantly changing please be prepared to receive a design that looks slightly different to the images. The ESC in itself is the exact same.
1. 200/250 class heli sports and 3D, Multirotor
2. 300g fixed-wing airplane 3D, 600g fixed-wing airplane sports
Hobbywing FlyFun 18A ESC
1 Specification
1.1 Output: Continuous 18A, Burst 22A up to 10 seconds.
1.2 Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NiMh battery.
1.3 BEC: 2A / 5V Linear mode BEC.
1.4 Refresh rate of the throttle signal: 50Hz to 432Hz.
1.5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)
1.6 Size: 55mm*25mm*6mm.
1.7 Weight: 21g.
2 Features
2.1 Safety arming feature: Regardless the throttle stick position, the motor will not spin after battery connected.
2.2 Throttle calibration funtion: Throttle range can be calibrated to be compatible with different transmitters.
2.3 User programmable.
2.4 Multiple program methods supported: transmitter stick, LED Program Card. Very easy to program the ESC at home or at the flying field.
2.5 Compatible with Lipo battery and NiCd/NiMH battery.
2.6 Internal timing can be changed to be suitable for different brushless motors.
2.7 Full protection: Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection.
2.8 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
Optional: LED prog card
