Brand: Tower Pro
Model: Tower Pro SG5010
Tower Pro SG5010 Servo x2
Stall Torque: 3.1kg/cm at 4.8V, 4.5kg/cm at 6.0V
No Load Running Speed: 0.17sec/60° at 4.8V, 0.14sec/60°at 6.0V
Size (L*W*H): 40.2 *20.2*43.2mm
Weight: 39g/ 1.44oz (Servo Net Weight Only)
Bearing Qty.: 2
Gear/ Case Type: nylon/ pla..
£18.70
Brand: Tower Pro
Model: Tower Pro SG90
Tower Pro SG90 Analog Servo
The price is for 4 servos
Application Fields: rc helicopters, micro robot, robot arm and rc boats
Stall Torque: 1.5kg/cm at 4.8V
No Load Running Speed: 0.3sec/60° at 4.8V
Size (L*W*H): 23*12.2*29mm
Weight: 9g
Bearing Qty.: 2
Gear/ Case T..
£16.95
Hot
Model: Trainer 20CC
Trainer 20CC RC Plane Model ARTFHere we have the Trainer 20CC RC Plane Model ARTFTrainer 20CC RC Plane Model ARTF. Spares are available only if you have purchased it from us.Trainer 20CC
Wing Span: 1860mm(73.2in)
Wing Area: 62dm2(961sq.in)
Total Length: 1550mm(61in)
Engine: 2C 0.60-0.8 cu.in 4C ..
£169.75
Model: Trim Tabs Length=31mm
Trim Tabs for RC Boat 2 pieces
Length=31mm
Width=30mm
Height=11mm..
£23.99
Model: Trim Tabs Length=40mm
Trim Tabs for RC Boat x 2
Length=40mm
Width=16mm
Height=27mm ..
£19.99
Model: Trim Tabs Length=46mm
Trim Tabs for RC Boat 2 pieces
Length=46mm
Width=57mm
Height=15mm ..
£26.92
Model: Trim Tabs Length=48mm
Trim Tabs for RC boat x 2
Length=48mm
Width=76mm
Height=15mm ..
£20.32
Model: Trim Tabs Width=76mm
Trim Tabs for RC Boat 2 pieces
Length=48mm
Width=76mm
Height=15mm ..
£27.43
Model: TS832 5.8G
TS832 5.8G 32Ch FPV Transmitter 600mW
Description:
Transmitter TS832 Parameters:
Transmission Frequency: 5.8 G , Transmission Power: 600 mw - Transmission Frequency Point: 32 points , Input Voltage: 7-16V , Antenna Connector: launch module end RP-SM..
£70.90
Model: TS832+RC832 32Ch
TS832 + RC832 - 32Ch FPV 5.8G 600mW A/V TX/RX System
Description
FPV 5.8G 600mW A/V Transmitting/Receiving System TS832 + RC832 - 32CH
THIS IS THE NEW 32CH EDITION OF 5.8G 600mW A/V WIRELESS SYSTEM.
-32 channels: Cover A, B, E bands and F band (Airwave band), 4 bands a..
£100.60
Model: Tune Pipe L360mm
Tune Pipe with Muffler for GP21 Nitro Engine
Specifications:
L1=360mm
L2=40mm
D1=4mm
D2=15.3mm
D3=4mm
D4=13mm
D5=25.2mm ..
£78.10
Model: Tune pipe L480mm
Tune pipe with Muffler L480mm for 4.5grade Nitro Engine ..
£80.50