Dualsky XC4018BA

Dualsky XC4018BA

Description:
XC4018BA,V2 ESC 40A,for airplane and Heli,with plugs.

Compact size, UBEC Xcontroller V2. XC4018BA, ESC 40A

Features:

● The new designed 2nd version software and hardware have many new features.
● Supports all motor types up to 210,000 rpm(2 Poles motors).
● Extremely low resistance, factory high quality MosFETs, for high current usage.
● Dualsky Governor Mode(DGM) ready.
● Adjustable cut-off, either motor stop or reduction in power.
● DLBM on/off - Dualsky Linear Brake Mode. Brake strength can be adjusted by 
   transmitter when switch on.
● Full protection features including: Low voltage cut-off, Over heating protection, 
   signal loss auto cut-off.
● Normal, Soft or Super-Soft start up modes available, for both fixed wing and 
   helicopter setups.
● Smooth and accurate throttle control throughout the range.
● Throttle digital signal sampling, compatible with the signal frequency of 14 ms 
   Normal mode and 7 ms high-speed mode (HS Mode).
● Throttle range can be re-calibrated, so suitable for all brands of transmitter.
● Fully PC programmable when used with Dualsky USB link(#45525).
● Compatible with programming card(#45200) for easy re-programming at the field!
● UBEC switching power supply, support up to 6S Lipo, 3A, easily support 4-5pcs of 
   standard Digital Servos.

Specification：

Dimensions: 52x 28x 14mm(L x W x D)
Weight: 32g
Number of Cell: NiXX 6-18, 7.2-21.6V
                         LiPo 2-6, 7.4-22.2V
Resistance(Ri)(Ohm): 0.0031
Max Cont.  Current & Max Cont.Output: 40A, 840W
Max Burst Current & Max Burst Output:  60A, 1224W
BEC / Dissipative Power: 5V/3A (Swiching)
Programmable: Throttle + ProgCARD V2
Input Wires: 120mm, 14AWG, DC3
Output Wires: 75mm, 16AWG, DB3
Signal Wire: 300MM JR

Applications:
450 Heli 3D
Up to .32 Class Sports