Menu
Your Cart
Up To 20% OFF Clearance products Shop now

Rcexl Ignition Use Mini Tachometer V3.0

Rcexl Ignition Use Mini Tachometer V3.0
2 - 3 Days
Rcexl Ignition Use Mini Tachometer V3.0

Rcexl Ignition Use Mini Tachometer V3.0

1: Rcexl Ignition Use Mini Tachometer V3.0

Use  P1C16F628a microcontrollers

2: no need of batteries, power from the ignition
3: Standard Futaba Plug(Black-negative Red-Postive and White-Signal)
4:Using high-brightness LED digital tube
5:Input voltage range: 3.5V -8.4V
6:Current consumption 25mA-60mA
7:Mini tachometer indicates up to 30000rpm
8:Actual RPM=Display digital *10
9:Body size:41mm L*17mm W*12mm H
10: Window size:30mm L*15mm H
11:Weight: 8.5g(0.3OZ)

Instructions:
1:The Y wiring tandem between in the Hall sensor and the ignition
2: The tachometer plug the other end with Y wire
3:Connected to ignition power supply and can be displayed

 Note: That connecting plugs do reinforcement.To preven vibration. the hall 
sonsor& tachmoter wire leave from the ignition high-voltage wire, And re-
ceiver wires over 30cm

Connection tachometer is not recommended after the use of the flight, Best 
to remove the Y wire to restore the original sensor connection

If ignition have an additional tachometer pinout,You must be connected to 
dedicated tachometer signal wire

 

Write a review

Note: HTML is not translated!
Bad Good
Captcha
  • Stock: 2 - 3 Days
  • Model: Mini Tachometer V3.0
2 samples sold
£12.20
Notification Module
We use cookies to provide you with the best possible experience. By continuing to use our site, you agree to our use of cookies.