Zerouav ZERO-E1100 V3 Octocopter
Click here for the full demo on how to install it
ZERO-E1100 Octo-rotor Version 3 System perfect for aerial cinematography solution.
In the package:
Octocopter frame x1
Motor x8
ESC x8
Propeller x8
GEMINI autopilot x1
Z2000 brushless gimbal x1
Safty Parachute x1
Retractable Landing Gear X1
Carrying case x 1
The maximum takeoff weight 11Kg
Motor type / KV value 5015 / 390KV
ESC drive PWM frequency 400Hz
The multicopter is with installed a Flight control, redundant ( dual system of sensors and control for greater safety ) with the following functions :
- Return to the point of take-off ( Return to Home RTH )
- Auto take off ( off automatic)
- Auto Landing ( landing strip automatically)
- Position Hold (maintenance position and height using GPS sensor and barometric )
- Manual control and integrated control
- Ability to perform flight missions with more programming waypoints ( from home or directly in the flight )
- Ability to make a path of Waypoints optimized for photogrammetry georeferenced , with the possibility of repeating the flight
- 8 rotors with brushless motors and propellers carbon
- Frame arms 8 carbon fiber, foldable quickly for easy transportability
- Set of LED lights for increased visibility
- Emergency parachutes with manual or automatic
- Electronic leash to limit the distance and the height insertable electronically
- Autopilot Redundant Systems Gemini with gyroscopic sensors, accelerometers, magnetometer, GPS, barometer, datalink
- Transmitter for datalink control of multicopter equipped with telemetry showing on the screen the following information:
- Battery voltage flight, Remaining flight, flight time.
- Parameters of flight, height, distance from the starting point, gps location, map, data logger with flight data recording.
- Audible and visual alarms for low battery, loss gps, engine failure, etc.
- Back to the point of take-off (return to home) in the event of signal loss
- Emergency parachutes with manual or automatic
- Possibility of mounting reach trucks and command to the Flight terminator
Dimensions: 110 x 110 x 60 cm
Maximum take-off-weight: 11kg
-Payload: About 5 kg to handle between payload and batteries
Gimbal Size: 66 x 48 x 45 cm
-Temperature Range: -5 ° + 40 °
Moisture content of range: 0% - 80%
-autonomy Flight continued: 11min (@ 12000mAH and a takeoff weight of 8kg) (The following values may vary depending on the payload and altitude of use, weather conditions and conditions of use)
-Data Link: 2.4 Ghz
-Speed Max: 10 m / s in GPS electronically limited
-Speed Vertical: 5 m / s electronically limited
ZERO TECH E1100 v3 FEATURES:
Heavy-lift capability
The maximum take-off weight is 11kg which means it can carry heavier equipment.
Small, Portable Design
Fold down arms of E1100v3 make the device very portable and easy to transport.
High Efficiency
Customized carbon fiber propellers are light, efficient and strong.
GEMINI Flight Controller
Dual redundancy Flight controller combines high-end flight experience with incredible safety. It is equipped with two independent controllers and two GPS antennas. In case of a sensor problem the other controller will take over and alert the user. This feature significantly decreases the risk of system failure.
Z-Series Gimbal Compatibility
E1100v3 is fully compatible with Z series brushless gimbals: Z2000, Z1400, Z-T30.
Integrated circuit design
All circuits including batteries, electronic components, motors and ESCs are integrated into the frame and arms. The integration simplifies wiring, reduces the possibility of malfunction and enables quick disassembly. It also hugely increases safety and reliability.
Shutter control Function
E1100v3 supports shutter control for compatible cameras. Upon completing the flight, all photo data can be saved to a file. Data includes longitude, latitude, altitude, course and attitude for each photo.
GCS – Ground Control Station
The whole flight, from take-off to landing, can be easily operated using portable devices like Smartphone/Tablet/PC GCS, which allows mobility and portability.
Black box
Built-in black box automatically records data and saves the last minute of activity before motors stop rotating. It doesn't require any additional data storage. Auto-recording and simple data exporting allows the user to easily review flight logs.
Follow Mode
This feature requires using a smartphone as GCS in GPS hover mode. After “follow me” function has been enabled, the aircraft will lock its heading and its flight path will directly follow phone's GPS location. Flying altitude is set by user.
Safety Parachute Compatibility
The parachute automatically deploys when the aircraft reaches 70 - 90 degrees angle. The flight controller will stop motors to protect the aircraft and parachute system. Parachute is directly connected to the flight controller.
360° Panorama
One-button function that controls the aircraft and allows gimbal to complete 360° rotation at the same time. In order for this feature to work properly the aircraft has to carry a matching Zero Tech gimbal. Autopilot controls the camera to take a 360° panoramic image. Function scans 4 layers of 37 high-definition photos for Panorama.
Waypoint Mission
User has an option to set a number of waypoints or to select pre-set patterns. Each Waypoint has an individual set-up such as height, hoover time, flight speed, etc., to meet the complex requirements for Auto-Mission. Shutter control can be set for each waypoint to track mission flights. All inputs can be easily changed during the flight.
Intelligent Course Lock
Intelligent Course Lock allows autopilot to record aircraft’s nose direction, and to fly the aircraft as recorded. From this moment the aircraft nose direction has nothing to do with forward direction.
Low Voltage Alert (SMARTPHONE GCS)
When voltage drops to pre-set low value, phone will automatically alert the user by vibration. When voltage drops below the pre-set low value, phone will keep vibrating at and high-frequency to remind the user to land the aircraft immediately.
Precise Position Hold
The flight controller uses the Kalman filter method to calculate the attitude and vertical velocity. Sophisticated sensors allow very precise hovering, which is less than 1.5 m horizontal and 0.5 m vertical.
Multiple Control Modes
With Gemini equipped Zero Tech E1100v3 supports multiple flight control modes and allows an easy switch between Manual mode, GPS attitude mode (Auto Hover /Auto Navigation /Auto Go Home/Landing), Phone attitude mode, Phone remote control mode, Rocker-arm mode.
Wi-Fi Connection
WIFI module provides convenient and simple communication between aircraft and smartphone/tablet or PC used as ground station. WIFI module has built-in two communication modes: Router mode and PP mode. The user can choose preferred mode. PP mode is very convenient for open space flights.
Phone Attitude Control
This feature allows to operate the aircraft using a smartphone device. User can fully control the aircraft by tilting their smartphone. Flying direction will follow tilt movements.
